4 Axle 80 Ton Heavy Duty Rear Dump Semi Trailer | For Mine & Quarry Site Internal Ore Transport
4 axle 80 ton heavy duty rear dump semi trailer built for internal ore and rock transport inside open-pit mines and quarries. Thick impact-resistant cargo box, reinforced frame and suspension for unpaved rough roads, large angle tipping with hydraulic rear door lock. Factory direct supply.
Loading Capacity: 80 Ton
Axle:4 Axle
Delivery Time: 25-30 Working Days
Price: 13000 USD. Price varies according to features.
Description
Anyone who's run haul trucks inside an open-pit mine or quarry will tell you the same thing: regular highway dump trailers fall apart fast out there. An excavator swings a 300kg-plus rock into the bed and you've got dents - or even holes - in the thin floor after just a few weeks. Try tipping a load of big boulders and half the time one jams in the tailgate. Stick it out for a few months on those rutted dirt haul roads and the frame starts cracking.
This 4-axle 80-ton heavy duty rear dump semi trailer is not a standard highway tipper with a higher payload sticker. We built it around the real conditions of on-site rock and ore hauling: impact loading, rough unpaved roads, and frequent short-cycle tipping.

We Reinforced The Parts That Take A Beating On Site
We didn't add unnecessary highway trim. We moved the budget to the components that fail first under rock loading and rough site roads.
- Impact-resistant thick steel cargo box
- Floor: 10mm high-strength wear-resistant steel (standard road dump trailers use only 6-8mm), 8mm thick side walls
- Reinforcement: extra support plates under the main loading impact zone, so large boulders dropped by excavators won't dent or pierce the floor
- Anti-jam design: sloped inner sides prevent rocks from wedging during tipping
2. 4-axle heavy duty frame and suspension
- Frame: thickened web main beam, extra reinforcement at axle and suspension mounting points to resist constant twisting on rutted mine roads
- Suspension: 4 axles with 120mm heavy-duty multi-leaf springs, rated for steady 80-ton loads on uneven ground
- Load distribution: impact spreads evenly across all axles instead of hitting the frame directly, cutting crack risk and extending service life
3. Large angle tipping + hydraulic locked rear door
- Tipping system: up to 55° tipping angle (standard road tippers are 45-50°), large boulders and sticky ore slide out completely without getting stuck
- Rear door: full hydraulic locking with heavy-duty hinges, stays tightly closed during transport and opens fully during tipping
- Result: no more spilled rocks on the haul road, no more jammed doors mid-tip
Where This Trailer Works Best
This is not a lightweight long-haul highway dump trailer. It is built for on-site heavy hauling:
- Open-pit mine internal hauling: Move run-of-mine ore, waste rock and overburden from the mining face to the crusher or waste dump inside the mine boundary
- Quarry and aggregate site operations: Transport blasted rock, large boulders and quarry spalls from the blasting face to the primary crushing station
- Large-scale infrastructure earthwork sites: Haul heavy rock fill, excavated earth and construction spoil directly across sprawling work zones with rough unpaved internal roads, no public highway routing needed.
- Coal and mineral processing plant yards: Shuttle raw ore, run-of-mine coal and processing waste between crushing/washing units and stockpiles entirely inside the plant boundary - short, high-frequency cycles with no public road licensing needed.
Basic Specification Reference
| Item | Value |
|---|---|
| Rated Payload | 80 Ton (heavy duty site version) |
| Axle Configuration | 4 axles |
| Cargo Box Dimension | 9500mm × 2500mm × 2000mm |
| Box Floor Thickness | 10mm wear-resistant high-strength steel |
| Box Side Wall Thickness | 8mm high-strength steel |
| Main Beam | 550mm height, reinforced Q345 steel |
| Suspension | 120mm heavy-duty multi-leaf spring |
| Tipping Angle | Up to 55° |
| Rear Door | Full hydraulic locking, heavy-duty hinges |
| Hydraulic System | Front-mounted multi-stage hydraulic cylinder |
| Brake System | Dual-line air brake + ABS |
| Tire | 12.00R20 heavy duty off-road tires |
| Curb Weight | Approx. 16,500kg |
Related Models
If you need side-unloading for narrow mine sites and stockpile building, our side tipper semi trailer range is designed for high-frequency site dumping. For moving large excavators, drilling rigs and crushing equipment to the mine site, check our lowbed semi trailer series. For transporting mine spare parts, steel and consumables on public roads, browse our flatbed semi trailer catalog.
Get Your Site Heavy Dump Trailer Quote
Coal and mineral processing facilities can move raw ore, untreated coal and tailings between processing lines and storage piles fully within the plant fence, running frequent short hauls that require no on-road registration.
Tell us what material you mostly haul, the average rock size, and your haul road conditions. Our engineers will send you a tailored configuration and factory-direct price within 24 working hours, with no unnecessary add-ons you won't use on site.
FAQ
Q1: How is this different from a standard 80-ton highway dump trailer?
A: Standard highway models use 6-8mm thin floors, lighter suspension and 45-50° tipping angles for paved roads. This site version has a 10mm wear-resistant floor, 4-axle heavy suspension and 55° tipping, built for rock impact loading and rough mine roads - it lasts 2-3 times longer on site.
Q2: Can I make the cargo box thicker for very large boulders?
A: Yes. We can upgrade the floor to 12-14mm wear steel, add replaceable wear liners and reinforce side walls based on your rock size. We will recommend the most cost-effective thickness for your actual material.
Q3: Is a 4-axle trailer flexible enough for narrow mine roads?
A: Yes. We optimized the wheelbase and steering geometry, so it follows the tractor path closely with a turning radius similar to 3-axle heavy dumpers. It works normally on standard 8m+ wide mine haul roads.
Q4:Are spare parts easy to find locally in Africa and Southeast Asia?
A: Yes. All wearing parts (brake pads, springs, seals, tires) are standard universal sizes available at local truck parts dealers. No proprietary parts requiring special ordering.
Hot Tags: 4 Axle 80 Ton Heavy Duty Rear Dump Semi Trailer | For Mine & Quarry Site Internal Ore Transport, China 4 Axle 80 Ton Heavy Duty Rear Dump Semi Trailer | For Mine & Quarry Site Internal Ore Transport manufacturers, factory, 3 Axles Semi trailer Dump Truck, Dump Tipper Trailer, Dump Trailer, Heavy Duty Dump Trailer, Tipper Semi Trailer
Send Inquiry
You Might Also Like









