Home - Knowledge - Details

Features of semi-trailer for powder material transportation

1. Frame and traction pin: The frame is a space frame type low-alloy steel welded structure, and the frame is welded by two T-shaped longitudinal beams and beams to support the load. There are a traction pin and a traction pin plate connected with the tractor under the front part of the vehicle frame, and the specification is No. 90. The traction pin is assembled and easy to replace. Air brake connectors and wire connection sockets are installed on the front beam of the vehicle frame. Lighting or signaling devices are installed on the front, rear and sides of the frame.

2. Suspension system: The rear lower part of the longitudinal beam is welded with a suspension device support, and the front lower part has a support device support. The suspension system is a three-axis leaf spring suspension, which is used to support loads and absorb driving vibrations. The leaf spring suspension system is fastened on the axle body with U-shaped bolts.

The parking brake is controlled by an energy storage spring brake system, and the wheel brakes double as the parking brake. Use this device when parking or parking on a slope.

3. Axle and wheels: three axle assemblies with the same structure are installed under the suspension system. The axle is a square tube axle, and the axle body is provided with a platform for installing a leaf spring suspension and a bracket for installing a brake air chamber. The shaft head is used to install wheels, hubs and brakes.

4. Support device: In order to make the semi-trailer park reliably after detaching from the index car, two support devices with left and right linkage or left and right single action are installed at the front end of the frame. It consists of a screw drive mechanism, a bevel gear drive mechanism, a two-speed reduction box, a transmission rod, and an operating handle. Turn when the handle is pushed in for high-speed lift, and turn when the handle is pulled out for low speed. When the base touches the ground, only low gear can be used for lifting.

5. Brake and its operating device: The semi-trailer adopts a double-pipe pneumatic brake system and is equipped with an anti-lock brake system (ABS). The service brake system mainly consists of air joints, inflation pipelines, operating pipelines, emergency relay valves, air storage tanks, brake chambers and wheel brakes. The gas connector of the inflation pipeline is connected with the tractor's air tank, and the gas connector of the operating pipeline is connected with the brake valve of the tractor. When the semi-trailer brakes, each brake chamber acts simultaneously. When the driver steps on the brake pedal, each brake chamber of the semi-trailer works to realize normal foot braking. When the inflatable pipe leaks or bursts, or the tractor suddenly disengages from the semi-trailer during driving and the pipeline is disconnected, the semi-trailer can automatically brake. When the car and train stop and the tractor is separated from the semi-trailer, the semi-trailer can brake by itself. If the parking time is short, it is not necessary to use the parking brake.

6. Electrical system: The semi-trailer is equipped with an international general electrical system compatible with the tractor. There is an electric connector socket on the front beam of the vehicle frame. There are brake lights, turn signals, parking lights, reversing lights, license plate lights, fog lights and triangular reflectors at the rear of the frame, front position lights and width lights, side marker lights, and front right Equipped with ABS indicator light. The voltage of various lamps is DC 24V.

7. Tank body: The tank body is an all-metal welded part. The tank body is a closed material-loading container formed by ordinary carbon structural steel plate butt joints and stamped head welding, with a volume of 55m3. There are manholes and walking platforms above for loading, unloading and maintenance personnel to enter the tank. There is a fluidized bed air chamber inside the tank. The air chamber is composed of a slide plate and an air bag, so that the compressed air passes through the air bag to fluidize the powder material and then discharges from the discharge pipe. The head is blanked with a plasma CNC cutting machine, and then it is formed by one-time spinning with an imitation flanging machine to increase the strength. Manual knocking on the flanging is not allowed to avoid material damage;

8. External power and air compressor: external Weichai 4100 engine and Wuhu 10.00 vehicle air compressor unit ensure sufficient air pressure when unloading the vehicle.


Send Inquiry

You Might Also Like