Oil semi-trailer manufacturing process

The square tank body of the oil transport semi-trailer is made of Q235A steel plate. The tank body is built with multiple reinforced anti-wave partition boards. There are through holes at the lower end of the partition board to reduce the impact of the oil in the tank during driving and improve the strength of the tank body. . The mouth of the combination tank is located on the top of the tank body, and there is a small self-locking cover on the top of the big cover, and a breathing valve is installed on the upper side of the big cover to ensure that the atmospheric pressure inside and outside the tank is consistent; it is equipped with an electrostatic grounding wire. The oil pump system is installed, and the power is taken from the gearbox side through the power take-off, which can be self-priming and self-discharging; it is equipped with two oil suction pipes, equipped with quick-fit joints, and the suction distance is 6 meters. Two fire extinguishers and special tools.