50-Ton Mining Rock Dump Trailer — Reinforced Box Tipper for Iron Ore, Copper and Quarry Aggregate
video
50-Ton Mining Rock Dump Trailer — Reinforced Box Tipper for Iron Ore, Copper and Quarry Aggregate

50-Ton Mining Rock Dump Trailer — Reinforced Box Tipper for Iron Ore, Copper and Quarry Aggregate

50-ton mining rock dump trailer with 8mm HARDOX floor, 3×16T axles, heavy leaf spring and HYVA front lift. Built for iron ore, copper and quarry aggregate in Africa, Central Asia and the Middle East.

Loading Capacity: 50 Tons
Axle:2/3/4 Axle
Delivery Time: 15-20 Working Days

Price: 11600 USD. Price varies according to features.

Description

 

Step onto an open-pit iron ore mine in Liberia, a copper mine pit in the DRC, or a limestone quarry in Saudi Arabia, and you'll spot the same recurring defect on half of the dump trailers stationed at the crusher station: undulating floor plates, crumpled front bulkheads damaged by loader buckets during loading, and leaking hydraulic cylinder seals for which local repair shops have no replacement parts.

 

Those trailers were spec'd for sand and gravel on a highway. They were never meant to take a 3-ton lump of hematite dropped from 4 meters by a CAT 777 loader every eight minutes, 18 hours a day.

 

This 50-ton mining rock dump trailer is spec'd for that job. It is not the cheapest trailer in our catalog, but it is the one that stays in the mine instead of spending half its life in a repair shop.

 

50 ton 3 axle mining rock dump trailer with reinforced rectangular box
Vehicle Master 50-ton mining rock dump trailer, 3-axle reinforced box, ready for factory delivery

 

Why We Do Not Use a U-Shaped Box for Rock Haulage

 

Customers often ask us why we do not put the popular U-shaped body (the one we sell for coal and sticky materials) on this mining model. The answer is simple physics.

 

A U-shaped body has curved side plates that look good for sand flow, but the radius is thin in the middle of the curve. When a 200–300 kg lump of rock falls off a loader bucket, it hits the floor plate flat - not the wall. For U‑body tipper bodies, the floor is a standalone pressed panel, usually made of thinner material (4–5 mm gauge). The curved side walls are designed to bear most of the structural stress. If heavy rock keeps pounding this floor twice per working shift, it can be punctured in as little as four months.

 

On this mining model we use a full rectangular box:

  • Floor plate: 8mm HARDOX 450 (standard) or 10mm (upgrade for iron ore / copper)
  • Side plate: 6mm HARDOX 450

  • Front headboard: 10 mm bolt‑on rock deflector - a serviceable wear plate welded onto the front bulkhead. When the loader bucket strikes it during loading, you only swap out this $300 plate instead of replacing the entire headboard.
  • Rear door: Robust three‑point locking system fitted with 16 mm steel hinges, departing from the standard 8 mm pins that easily deform when wet clay freezes against the door.

 

The trade-off is less residual-material flow than a U-body (about 1–2% residue vs 0.3%). For clean hard rock and run-of-mine ore, that residue is just dust - not money. For coal or sticky clay, you want the U-body instead.

 

Front-Mounted Telescopic Hoist Cylinder - Scissor-Free Underbody Design

 

There are two ways to lift a 50-ton loaded box. The cheaper way is an under-body scissor or twin-ram lift - the kind you see on 30-ton construction dumpers. On a 50-ton rock box over rough mine roads, that mechanism flexes, the pivot pins wear oval in six months, and the box starts rocking side to side on the lift.

 

We spec this model with a single front-mounted HYVA 191-5 telescopic cylinder (190mm stage, 5-stage, 38-ton lifting force). The cylinder sits vertically under the front of the box, directly behind the cab. Advantages we see on real mining fleets:

  • Lifting force is centered on the front, so the box rises straight even when the load is slightly off-center
  • Ground-level pre-trip inspection of the cylinder; no under-trailer access required to check pin wear
  • Cylinder seals are interchangeable standard HYVA parts, stocked in key mining cities across target markets
  • Rated for 2,000+ lifts before first seal replacement; under-body scissors on the same box typically need pin re-bushing at 800–1,000 lifts

 

The cylinder is paired with a tractor PTO-driven gear pump (100 L/min) and a pneumatic control valve with limit switch - the box stops at 48 degrees automatically, so a tired operator cannot over-lift and tip the whole rig backward on a slope.

 

Quick Spec Reference (Mining 50-Ton Version)

 

Item Specification
Rated Payload 50 tons (tested to 58 tons short-cycle)
Box Capacity 28 CBM (heaped)
Box Shape Full rectangular, rock guard at front
Floor Plate 8mm HARDOX 450 (10mm upgrade available)
Side Plate 6mm HARDOX 450
Axles 3 × 16t FUWA / BPW (not 13t)
Suspension Heavy-duty 9-leaf mechanical spring, 100mm axle seat
Lift Cylinder HYVA 191-5, front telescopic, 38t force
Dumping Angle 48° max, automatic stop
Tires 12.00R20 × 12, E-3 rock pattern (not highway 12R22.5)
Brakes WABCO drum + ABS, manual slack adjusters
King Pin JOST 3.5" (90#)
Landing Gear 28t two-speed, JOST
Curb Weight ~11,800 kg

 

The 3-Year Cost Calculation Mine Superintendents Use In Practice

 

A 50-ton rock dump trailer running 20 hours a day, 6 days a week, moves roughly:

  • Per shift: 4 trips × 50t = 200 tons
  • Per week: 6 days × 2 shifts × 200t = 2,400 tons
  • Per year: ~125,000 tons moved

 

On a generic 4mm-floor dump trailer running the same route, the floor plate punches through around month 4–5, and the first cylinder seal replacement hits around month 8. Downtime and repair work cost you approximately 18–22 production days annually. This translates to 9,000–11,000 tons of lost haulage. With a profit margin of $1.5–2.0 per ton, each trailer loses $14,000–22,000 in revenue every year.

 

The mining spec trailer costs about $4,000–6,000 more up front (HARDOX floor, 16t axles, HYVA cylinder, rock tires). In most African and Central Asian mines, that premium is recovered in the first 8–10 months of operation, and after that every ton it moves is pure margin versus the generic alternative.

 

50 ton mining rock dump trailer production workshop, heavy duty axle, welding process, reinforced frame details
Mining dump trailer manufacturing, axles & reinforced structure

 

When You Should Not Order This Mining Version

 

We push back on the 50-ton mining spec if:

  • You haul sand, gravel or asphalt over paved surfaces. E-3 rock tires suffer rapid wear on tarmac, and reinforced heavy flooring cuts down your available payload. A regular 45-ton U-type tipper semi trailer delivers lower cost and superior performance for on-road hauling.
  • You haul coal between the mine and a rail loading point. Coal is light and flows - our rear dump coal trailer is optimized for volume, not impact resistance.
  • Your load is under 30 tons or you need a custom shorter box. For mixed construction-and-quarry work, the custom 30/50-ton dump semi trailer lets us size the box exactly to your route.
  • You need to haul the excavator itself to the site. That job is for a lowbed semi trailer, not a tipper.

 

For the full range of rear-dump configurations, see our dump semi trailer catalog. Let us know your hauled rock type (iron ore, copper ore, limestone, granite), the haul distance from pit to crusher, and if your mine road is graded or ungraded. Our engineers will tailor the floor thickness and axle configuration to suit your site, and provide a factory-direct quote in 24 working hours.

Finished 50-ton mining rock dump tipper trailer, spare parts packaged for export to Africa, Central Asia, Middle East
Ready mining dump trailer with bundled spare parts

 

FAQ

 

Q1: Do you really use HARDOX, or is it just ordinary steel painted silver?

A: We supply the mill certificate (EN 10204 3.1) with every trailer. Standard floor is Chinese equivalent NM450; HARDOX 450 from SSAB is a paid upgrade with the original SSAB stamp on each plate.

 

Q2: Can the box be widened or shortened for narrow mine access roads?

A: Yes. Standard box is 8.2m long × 2.55m wide. We regularly build 7.5m or 9m versions, and we can narrow the body to 2.3m for pit roads that standard 2.55m trailers cannot pass.

 

Q3: What is the lead time for mining-spec trailers?

A: Production takes 30 working days upon receipt of deposit for a standard 50-ton mining model. A HARDOX plate upgrade extends lead time by 7–10 days due to imported material. An additional 30–45 days should be allowed for ocean shipping to West Africa, Central Asia and the Middle East.

 

Q4: How do you handle spare parts in remote mines?

A: We ship a starter spare kit with every trailer (cylinder seal kit, slack adjusters, brake pads, one set of E-3 tires). After that, HYVA seals and FUWA/BPW parts are available through local dealers in most mining countries; we also air-freight critical parts on request.

 

 

 

Hot Tags: 50-Ton Mining Rock Dump Trailer — Reinforced Box Tipper for Iron Ore, Copper and Quarry Aggregate, China 50-Ton Mining Rock Dump Trailer — Reinforced Box Tipper for Iron Ore, Copper and Quarry Aggregate manufacturers, factory, Dump Trailer, 3 Axles Semi trailer Dump Truck, Heavy Duty Dump Trailer, Tipper Semi Trailer, Dump Tipper Trailer

You Might Also Like

Shopping Bags