3-Axle Removable Side Wall Semi Trailer — Convertible General Cargo Carrier with Selectable Wall Height
3-axle removable side wall semi trailer for mixed general cargo. Selectable 600/1200/1700mm walls, pinned drop boards convert to a flatbed, forklift side access. Factory direct.
Product Name:Side Wall Truck Trailer
Price: Price:Direct factory. Order now and get 10% off.
Different Parameters, Different Price
Contact us for more infos.
Description
The 3-axle removable side wall semi trailer is a general cargo carrier with steel side boards pinned into stake pockets rather than welded on. The boards lift out as panels, so the same trailer runs as a sidewall on one trip and as a flatbed on the next. Rated payload 30–60 t, deck 13,000 × 2,550 mm, three 13 t axles.
Side wall height is selected based on what you haul. A 600 mm height works for steel and timber; 1,200 mm suits bagged construction supplies and palletized loads, while 1,700 mm is ideal for loose bagged items and light bulk materials.

How Sideboards Improve on a Standard Flatbed Trailer
A flatbed carries anything you can chain or strap down. The sidewall adds a low steel barrier that stops cargo sliding, rolling or tipping off the sides on a corner or a rough road.
Four cargo types rely on that barrier:
- Bagged goods - cement bags, rice bags, fertilizer bags, stacked in layers. Without sideboards the bottom layer can push out through the lashing gaps on a rough road.
- Bricks, blocks and masonry - Unregularly shaped loads fit poorly on slatted platforms; sideboards stop the stack from spreading laterally.
- Timber and steel sections - long bars and planks that rest against the side rather than standing upright; the wall carries part of their lateral weight.
- Palletized and crated mixed cargo - mixed-size pallets and wooden crates that do not all strap to the deck frame cleanly.
For any of these, a sidewall removes one lashing layer: you strap the load to the deck, and the boards keep the outer layer from walking off the edge.
Wall Height: Pick to the Cargo, Not to a Default Size
| Wall height | Suited cargo | Why this height |
|---|---|---|
| 600 mm | Steel sections, pipes, timber, pallets, heavy machinery parts | Low wall stops sideways slip; does not block crane or forklift side access |
| 1,200 mm | Bagged cement, bricks, blocks, furniture, mixed general freight | Main volume protection for stacked bagged and palletized loads |
| 1,700 mm | Loose bagged grain, fertilizer, agri bags, light bulk, stacked cartons | Near-full side enclosure; closest to a box open at top |
Stake pockets hold fixed wall posts; removable sideboards slot between the posts.One trailer can ship with two board sets (e.g. 600 mm and 1,200 mm) and swap sets per trip.
Removable Drop-Side Conversion
No welds hold the sideboards to the frame - they fit into stake pockets and lock with removable steel pins.
Lift-off configuration. Pull the pins, lift each panel out by its two lifting eyes, set the boards on the deck or in a yard rack. Conversion to flatbed takes 20–30 minutes for a two-person crew. The stake posts remain on the deck, and the trailer runs open.
Hinged drop-side configuration. On request, the lower boards hinge downward at the bottom rail instead of lifting off. The wall swings out for forklift side loading and locks back up for transit. This works well for yards where loading happens from side bays instead of through the rear.
What remains once the sideboards are taken off. Deck tie-down rings, rear door hinges if fitted, and the stake pocket posts remain. You do not lose the flatbed's lashing points when you remove the sidewall.
Specifications (3-Axle General Cargo Sidewall)
| Item | Specification |
|---|---|
| Rated Payload | 30–60 t |
| Deck Length × Width | 13,000 × 2,550 mm |
| Wall Height | 600 / 1,200 / 1,700 mm (selectable; dual-set option) |
| Wall Construction | Pinned steel sideboards for stake pockets, available as lift‑off or hinged drop‑side types |
| Main Beam | Q345, I-section, 500 mm beam height |
| Deck Floor | Steel plate over cross-members |
| Axles | 3 × 13 t FUWA / BPW |
| Suspension | 90 × 13 mm × 10 leaves, mechanical |
| Brakes | Dual-line air, ABS |
| Tires | 12R22.5 × 12 |
| Rim | 9.00 × 22.5 steel |
| King Pin | JOST 3.5" |
| Landing Gear | 28 t two-speed JOST |
| Rear Door | Barn doors optional |
| Side Access | Drop-side flap or hinged boards optional |
| Curb Weight | ~7,500 kg (1,200 mm wall) |

Deck, Door & Lashing Specifications
Stake pockets. A continuous row of pockets along both side rails holds the wall posts at set spacing. Pockets stay welded to the deck; boards and posts slot in and out.
Deck lashing rings. D-rings are fitted along the deck, separate from the side walls. Load straps fasten to these D-rings instead of the sideboards; the sideboards act only as a guard, not a load-securing structure.
Rear doors. Optional barn doors at the rear close the load end; side flap or hinged boards give forklift access from the side without moving the whole stack forward.
Coating & Corrosion Resistance. Sand-blasted surface, one anti-rust coat plus two topcoats, built for coastal and dusty inland yard conditions.
Which Trailer Fits Which Load
| Cargo | Best trailer |
|---|---|
| Mixed bags, bricks, blocks, pallets, timber | This sidewall |
| Long steel, machinery, open-access heavy loads | 3-axle flatbed |
| High stacked bundles, lumber, pipe racks, scaffolding | fence trailer |
| Weather-sensitive sealed cargo, boxed retail goods | box van trailer |
| Liquids and dry powders | Tanker, not a sidewall |
The full sidewall range is listed on our side wall semi trailer page. Send us your main cargo types, typical bag weights and whether forklift side loading is required, and we will confirm wall height, board fixing and door layout before quoting.
Every trailer comes supplied with spare pins, a strap kit for the board rack, and a lashing diagram tailored for your specified cargo. Lead time is 25 working days from deposit, plus sea freight to your nearest port.

FAQ
Q1: Are the sideboards welded on?
A: No. They pin into stake pockets and lift out, or hinge downward on the drop-side option. Welded boards cannot be removed; our configuration converts to flatbed.
Q2: How much time is needed to take off the sideboards?
A: 20–30 minutes for a two-person crew, lift-off type. Hinged drop-side boards lower in minutes but stay on the trailer.
Q3: Can one trailer carry two wall heights?
A: Yes. Dual sideboard sets are available: e.g. 600 mm for steel sections, 1200 mm for bagged goods. Posts and pockets are the same; you swap panels between trips.
Q4: Do the sideboards carry the load?
A: No. The load straps to deck D-rings. Sideboards are a barrier against sideways slip; they are not designed as the primary tie-down.
Hot Tags: 3-Axle Removable Side Wall Semi Trailer — Convertible General Cargo Carrier with Selectable Wall Height, China 3-Axle Removable Side Wall Semi Trailer — Convertible General Cargo Carrier with Selectable Wall Height manufacturers, factory, Sidewall Trailer, 3 Axles Sidewall Semi Trailer, Side Wall Cargo Trailer, Sidewall Semi Trailer
Send Inquiry
You Might Also Like










