Interlink Superlink Trailer — 25-Meter Double Semi Road Train for Mining and Long-Haul Bulk Haulage in Africa and Central Asia
video
Interlink Superlink Trailer — 25-Meter Double Semi Road Train for Mining and Long-Haul Bulk Haulage in Africa and Central Asia

Interlink Superlink Trailer — 25-Meter Double Semi Road Train for Mining and Long-Haul Bulk Haulage in Africa and Central Asia

Interlink superlink road train with front semi + rear full trailer via converter dolly. 60–80 ton combined payload for mining corridors in Africa, Mongolia and Central Asia. Factory direct from Vehicle Master.
Delivery Time :Production Time: 30 days
Warranty: 2 Year Warranty for Main Structure
Axles:1, 2, 3 (Customizable)
Shipping Method:Sea/Land
Package and Shpping :Nude Packing. Transported by tractor
After-Sale Service :Phone guidance/Video guidance/Technical Staff on site in necessary.

Contact us for more infos.

Description

 

 

If your experience is limited to standard 13‑metre single semi‑trailers, hooking up a 25‑metre interlink road train for the first time will be a real eye‑opener.

 

The trailer behind you is not one unit. It is two. The front one hangs off your fifth wheel like a normal semi. The rear one does not - it sits on its own axles, linked to the front by a converter dolly with a turntable that pivots. When you turn the steering wheel to the left, the rear trailer won't track the front unit right away. It cuts in toward the corner. And when reversing, the rear trailer swings in the opposite direction. On a wet road in the Zambian copper belt, a driver who has not practiced this can jackknife a $120,000 rig into a ditch before lunch.

 

But once a driver is trained, an interlink is the cheapest way per tonne-kilometer to move bulk cargo on a long, straight, open route. One tractor, one driver, two trailers, 70 tons of payload. That is the entire business case.

 

 

Yellow 3-axle flatbed semi trailer with front headboard and twist locks parked outside Vehicle Master factory yar       Yellow gooseneck section of heavy-duty semi trailer with dual wheels and landing gear, parked beside factory landscaping

 

Two red 3-axle flatbed semi trailers stacked for export transport, showing gooseneck design and side stake sockets       White 3-axle flatbed semi trailer with front panel, fifth wheel coupling and WABCO brake lines at Vehicle Master workshop

How the Two Trailers Actually Connect

Most buyers have never examined a converter dolly in person. Yet this component is what makes or breaks an interlink road train.

  • Front semi-trailer. A standard 3-axle unit - flatbed, skeleton, tipper or box body depending on what you haul. It couples to the tractor's fifth wheel in the usual way. We build these as 13m flatbeds, 40ft skeleton chassis, or 50-ton rear dump tippers depending on the corridor.
  • Interlink dolly. A 1.5–2m short frame with its own single axle, a drawbar eye at the front (pins into a hook on the rear of the front semi), and a fifth wheel at the top (the rear semi's kingpin locks onto it). The dolly has its own air reservoir, its own ABS connection, and a hydraulic brake line that links to the front trailer's brake system.
  • Rear semi-trailer. This 2‑axle or 3‑axle assembly resembles a standard semi‑trailer, yet it comes without landing gear or front supports - it is never designed to stand independently. Its kingpin locks onto the fifth wheel of the dolly.

 

The whole rig makes three flexible connections: the tractor-to-front-semi fifth wheel, the front-semi-to-dolly drawbar, and the dolly-to-rear-semi fifth wheel. On a long straight road these three pivots barely move. On a roundabout, the dolly turntable is what lets the rear trailer follow without scraping the inside rear wheel off on the curb.

 

 

What It's Like to Drive and Reverse a 25‑Metre Rig

We have trained drivers from Lubumbashi to Ulaanbaatar. Here is what they tell us.

 

On the open road. Once you are at speed, an interlink drives almost like a normal truck. The rear trailer tracks the front within about 1 meter on a gentle curve. Fuel economy per tonne is about 30–40% better than running two separate tractors. Drivers settle in and it feels fine.

 

On a roundabout. This is where new drivers panic. The rear trailer cuts the corner by about 2–3 meters compared to the front. If you take the roundabout too tight, the rear trailer's rear wheel climbs the inside curb. Skilled drivers take a wide line when entering a turn, let the rear trailer pass the apex, and then straighten up.

 

Reversing. This is the skill that takes a week of practice. Reversing a single semi, you turn the wheel right and the nose goes right. Reversing an interlink, you turn the wheel right and the rear of the front semi goes left - which pushes the dolly right - which makes the rear semi go left.The rear trailer traces a question mark shape in your path. Most interlink operators avoid reversing more than 5 metres. Instead, they pull through, uncouple, and manoeuvre the rear trailer into place manually.

 

Overtaking. A 25m rig takes about 400 meters to overtake a truck at 80 km/h. On a two-lane road with oncoming traffic, you wait. There is no rushing.

 

 

Quick Spec Reference (Mining Corridor Interlink)

Item Front Semi Rear Full Trailer
Type 3-axle skeleton / flatbed / tipper 2-axle full trailer
Deck Length 12,500 mm 10,000 mm
Axles 3 × 13t FUWA/BPW 2 × 13t FUWA/BPW
Payload 35–40 tons 30–35 tons
Combined Payload 65–75 tons
King Pin JOST 3.5" (front semi only) Drops on dolly fifth wheel
Converter Dolly 1 axle, drawbar + 5th wheel
Brakes WABCO air + ABS, interlinked across dolly
Air Lines Front→dolly→rear, 3-line emergency
Electrical 24V ABS signal interlinked
Suspension Heavy mechanical leaf spring
Tires 12R22.5 × 12 (front) + × 8 (rear)
Curb Weight (both) ~14,000 kg
Overall Rig Length ~25,500 mm
Tractor Required 6×4 or 8×4, 500+ hp, GCW ≥ 80t

 

Two yellow 3-axle flatbed semi trailers stacked and secured with wire rope for sea shipment, showing landing gear and twist lock rails

 

When an Interlink Makes Money (and When It Does Not)

The 30–40% fuel saving per tonne only works under specific conditions:

 

It makes money on:

  • Straight, paved mine haul routes - such as Solwezi to Lusaka, Obusi to Mongu, and Ulaanbaatar to the coalfields
  • Routes where you carry a full load outbound and a full load back (e.g. copper concentrate out, fuel/equipment in)
  • Long-distance intercity haul where one tractor can do the work of two
  • Where interlink rigs are legal to operate - South Africa, Botswana, Namibia, Zambia, Zimbabwe, Australia, Mongolia and select areas across Central Asia

 

It loses money on:

  • City delivery or multi-stop routes - you cannot reverse into a loading dock with a 25m rig
  • Narrow mountain roads or bridges with weight limits under 80t
  • egions where interlink road trains cannot be legally registered: most of Southeast Asia, Central America, and urban areas across Europe
  • Routes with frequent turns, roundabouts, or tight access - the time lost maneuvering kills the fuel saving

 

The math is simple: if your average trip is over 200 km on a straight road with full loads both ways, the interlink pays back its $35,000–50,000 price premium over two separate singles in about 18–24 months. If you do short urban runs, it never pays back.

 

 

What You Should Not Haul With an Interlink

We will tell you straight:

 

For the full special-purpose range, see our special semi trailer catalog. Share with us the routes you plan to operate - port‑to‑mine, mine‑to‑rail, or city‑to‑city - whether interlink rigs are permitted there, and the cargo you haul in each direction- our engineers will spec the front/rear body type (skeleton, flatbed, tipper, box), axle count and dolly configuration, then send a factory-direct quote within 24 working hours.

 

 

FAQ

Q1: Is an interlink legal on the road I want to run?

A: Interlinks (officially called AB doubles or road trains) are legal in South Africa, Botswana, Namibia, Zambia, Zimbabwe, Australia, Mongolia and parts of Kazakhstan. They are not legal in most of Southeast Asia, Central America, or European cities. Check with your road authority before ordering. We spec to your country's road traffic act.

 

Q2: Can I disconnect the rear trailer and use the front one like a regular semi?

A: Yes. That is the beauty of the design. The dolly pins off in 10 minutes, the rear semi can be parked on its own landing gear (we add landing gear to the rear unit), and the front runs as a normal 3-axle semi. Many fleets use the interlink on long runs and split it for short urban deliveries.

 

Q3: What tractor do I need to pull a 70-ton interlink?

A: A 6×4 or 8×4 tractor unit with a minimum 80‑tonne GCW rating, 500+ horsepower and an 18‑speed gearbox. A standard 400-hp over-the-road tractor will struggle on hills. We can also supply the tractor if you need a complete rig.

 

Q4: How do you ship a 25-meter interlink to Africa or Central Asia?

A: The front semi, rear semi and dolly ship separately by Ro-Ro or breakbulk. Total shipping volume is about 180 CBM. Local assembly is about 3 days: pin the dolly to the front, drop the rear semi onto the dolly, connect air lines and electrics. We supply a complete assembly manual in both English and French with every shipment.

 

 

Hot Tags: Interlink Superlink Trailer — 25-Meter Double Semi Road Train for Mining and Long-Haul Bulk Haulage in Africa and Central Asia, China Interlink Superlink Trailer — 25-Meter Double Semi Road Train for Mining and Long-Haul Bulk Haulage in Africa and Central Asia manufacturers, factory, Flatbed Superlink Trailer, Container Self Loading Trailer, Multi Axle Truck Trailer, Extendable Truck Trailer, Special Semi Trailer, Wind Blade Truck Trailer

Previous:No Information

You Might Also Like

Shopping Bags